- IP20 enclosure (optional IP66) with V/Hz and sensorless vector control
- Single and Three-phase input power supply, 200-240V or 380-480V, input voltage
- 150% current overload capacity (during 60 s every 10min)
- 2.5/5/10/15 kHz adjustable IGBT’s switching frequency
- 4 programmable digital inputs, 2 programmable relay outputs (plus version)
- 2 programmable analog input (plus version)
- Protective features: Overcurrent, motor overload, drive over temperature, output phase-to-phase and phase-to-ground short circuit, DC bus over and undervoltage and external fault.
- Control features: Linear and “S” acceleration and deceleration ramps, local/remote control, DC braking, torque boost, motor slip compensation, electronic pot, preset speeds, adjustable V/Hz profile, maximum and minimum adjustable frequency limits, two skip frequencies, adjustable output current limit, JOG, ride-thru and flying start, process regulator – PID.
- Display readings: Motor speed, frequency, current, voltage, last fault, heatsink temp. and drive status
- Ambient: 0C (32F) to 40C (104F), 1000m (3300 ft) altitude, 90% non-condensing humidity
- ModBus RTU communication capability (standard)
- Fieldbus: Profibus, Device Net (with MFW-01 external module)
- Remote Keypad, Keypad IP55 Enclosure
- IP20 Kit, DIN Rail Mounting, EMA Filters
- Pumps, Fans, Blowers & Mixers
- Mixers, Conveyors